Karate Pig Amigurumi Funny Toy PDF Pattern (3)

Today, I’m here with a very interesting and fun design: a cute pig in a karate costume! Although the crochet pig is generally at a beginner level, preparing the karate costume may take a bit of your time. Also, the pig and the costume need to be compatible. If you’re skilled in this area, the costume will fit the pig’s body properly and you’ll be able to dress the piglet with ease. The crochet piglet is basically made using three different yarn colors.

Pig in Karate Costume Crochet Free PDF Pattern

The colors and types of yarn you’ll use while making the toy are shared in detail in the materials section. In addition to that, I’d like to mention a few changes you can make. If you wish, you can make dark pink cheeks for the piglet. You’ve probably seen similar designs like this before. Also, the fact that the karate costume is a wearable piece is really a great option.

The crochet piglet is made by combining 5 parts. Don’t forget to make a black belt for the pig in the karate costume. One detail you could change, in my opinion, is the belt. If you make this piece in pink tones, it could become a great toy for girls. Especially our little girls really love these types of toys.

Designer: trippaycrochet

Materials

Weight (6) super bulky in white, light pink, dark pink, black.
4.5 mm hook
18mm safety eyes
Yarn needle
Stitch marker
Scissors
Fiberfill

Important Note

Keep in mind when crocheting the clothes to use the same size hook that you use for the body, unless you are mixing yarns. Adjust hook as you see fit. Periodically put on the Karate outfit or Karate- Gi to check if your tension or hook size needs adjustment.

Abbreviations

• mr: magic ring
• sc: single crochet
• inc: increase
• dec: decrease
• ch: chain
• 2ndchfh: 2nd chain from hook
• BLO: back loop only
• cc: color change
• slst: slip stitch
• st: stitch
• sk: skip
• fo: fasten off

Another Important Note

To make an invisible FO for a cleaner look: slst after you complete the round. Cut the yarn, skip a stitch and thread the yarn through, then go through the back loop of the slst. Pull, but not too tightly. Weave in the tail.

Karate Pig Amigurumi Funny Toy PDF Pattern (2)

We’re starting with the pig’s arms. We begin with a dark pink color and a magic ring. After crocheting for 2 rounds, we switch to a light pink shade. After increasing for 6 rounds, in the following rounds we only do single crochet. So, you don’t need to do any decreases. It’s recommended to stuff the piece up to round 9.

Arms (x2)

Start in dark pink
R1: 6 sc in mr (6)
R2: BLO sc (6)
change color light pink
R3-5: sc (6) (3 rounds)
R6: (2 sc, inc) repeat 2 times (8)
R7-11: sc (8) (5 rounds)
stuff firmly up to R9.
fold in half and close with 4 sc. Fasten off.
No need to leave a tail, we will crochet the arms into the body.

Let’s make the body and legs of the toy! First, we will crochet the pig’s legs. We start with a dark pink color. After starting with 8 single crochets and a magic ring, we’ll form the legs of the toy up to round 8. You’ll need to do this process for both legs. After that, we’ll move on to the body. By crocheting a total of 20 rounds, we’ll form the pig’s legs and body.

Legs (x2) / Body

Start in dark pink
R1: 8 sc in mr (8)
R2: BLO sc (8)
change color light pink
R3: (3 sc, inc) repeat 2 times (10)
R4-8: sc (10) (5 rounds)
Fasten off 1st leg. Leave a tail for sewing the hole closed after the body is finished.
Do not fasten off 2nd leg. ch 3 and connect to 1st leg with a sc. Place st marker here. This will be the first st of R9.
R9: 10 sc, 3 sc in ch, 10 sc, 3 sc in ch (26)
R10: 6 sc, inc, 12 sc, inc, 6 sc (28)
R11-13: sc (28) (3 rounds)
R14: 6 sc, dec, 12 sc, dec, 6 sc (26)
R15-16: sc (26) (2 rounds)
Stuff the body firmly and stuff as you go.
R17: (11 sc, dec) repeat 2 times (24)
R18: (2 sc, dec) repeat 6 times (18)
R19: 3 sc, attach arm with 4 sc, 5 sc, attach arm with 4 sc, 2 sc (18)
Note: you may need to adjust where you place the arms by a few sc, in R19, based on your tension.
R20: (sc, dec) repeat 6 times (12)
FO. No need to leave a tail.

We’ll make the karate pig’s head using only light pink yarn. After starting with a magic ring, we’ll do increases for 4 rounds. From round 5 to round 10, we’ll continue with single crochet. After placing the eyes, we’ll do decreases up to round 13 to complete the head. Don’t forget to stuff the head while going through these steps.

Head

In light pink
R1: 8 sc in mr (8)
R2: inc x8 (16)
R3: (sc, inc) repeat 8 times (24)
R4: (2 sc, inc) repeat 8 times (32)
R5-10: sc (32)(6 rounds)
place safety eyes between R7-8, 7-8 sts apart.
R11: (2 sc, dec) repeat 8 times (24)
Stuff as you go.
R12: (sc, dec) repeat 8 times (16)
R13: (2 sc, dec) repeat 4 times (12)
FO, leave a long tail for sewing.

The pig’s muzzle will be made with dark pink yarn. We’ll crochet this part of the toy in just 2 rounds. If you wish, you can stuff it slightly before sewing it onto the pig’s face.

Snout

In dark pink
R1: ch 7, starting in 2nd chain from hook 2 sc, inc x2, 2 sc, working on other side, 2 sc, inc x2, 2 sc (16)
R2: BLO sc (16)
FO, leave a tail for sewing.

The pig’s ears will be crocheted in 5 rounds, but there’s no need to stuff this part. After finishing the piece, you can sew it onto the pig’s head from any point you prefer.

Ears (x2)

In light pink
R1: ch 7, starting in 2nd chain from hook, 2 sc, dec, 2 sc, ch 1 & turn
R2: 2 sc, dec, sc, ch 1 & turn
R3: sc, dec, sc, ch 1 & turn
R4: dec, sc, ch 1 & turn
R5: dec
do not turn. make 4 sc down the side of the ear, then 5 sc across bottom of the ear.
FO. Leave a tail for sewing.

The pig’s karate costume is made up of 3 pieces: pants, robe, and belt. You need to make these parts very carefully. By following the instructions completely, you can create this costume specially designed for the pig.

Pants

In White
R1: ch 14
connect with a slst to first ch.
R2-8: sc (14) (7 rounds)
Fasten off 1st pant leg.
Do not fasten off 2nd pant leg. ch 4 and connect to 1st leg with a sc. place st marker here.
This will be the first st of R9.
R9: 14 sc, 4 sc in ch, 14 sc, 4 sc in ch (36)
R10: sc (36)
R11: (8 sc, inc) repeat 4 times (40)
R12-14: sc(40) (3 rounds)
R15: 7 sc, dec, 18 sc, dec, 11 sc (38)
Fasten off.

Robe

In White
R1: ch 45, starting in 2nd chain from hook 44 sc, ch 1 & turn
R2: 12 sc, ch 6, sk 6, 8 sc, ch 6, sk 6, 12 sc, ch 1 & turn

R3: 12 sc, 6 sc in ch, 8 sc, 6 sc in ch, 12 sc, ch 1 & turn
R4-11: 44 sc, ch 1 & turn (8 rounds)
Fasten off.

Sleeves (x2)

In White
Attach yarn to a stitch of the sleeves (where you made the arm hole by sk 6).
R1-9: 12 sc (9 rounds)
Fasten off. Weave in tail.
ATTACH ANYWHERE TO MAKE THE SLEEVES.

FINISHED RESULT!

Black Belt

In Black
R1: ch 71, turn
R2: starting in 2nd chain from hook 70 sc
Fasten off. Weave in tail.

Assembly

EARS

sew the ears between R 3 & 7, down either side of the head roughly 3 sts back from the eyes.

SNOUT

sew the snout between R 7 & 10 of the head, between the eyes.

HEAD TO BODY

since the head and body have the same amount of sts left over, sew head onto the body as straight as possible.

BLACK BELT

tie the black belt around the waist after styling the Karate-Gi tightly.